Selecting the Best Outdoor Ceiling Fans for 2021

When purchasing outdoor ceiling fans, getting one that is precisely designed for the purpose of outside use is essential.

There is a high probability that using an indoor ceiling fan as an assembly for outside lighting may cause problems soon after the job is complete.

Ceiling fans for outside use employ an entirely different design than indoor ceiling fans. The outside versions are made to handle any weather conditions that include excessive heat, rain, ice, snow, fluctuations in wind, and more.

One of the differences in an outdoor ceiling fan is that it will be made with a barrier or design around the decorative motor casing. This seal keeps moisture and water away from the motor inside, which is not the case of an indoor fan assembly.

In addition, the light fixtures are sealed on top and designed precisely for outdoor use. The wiring is made of a higher quality with added coverings and screws, and along with other important components, is usually made of stainless steel.

There is a protective powder coating applied to the hardware and motor casing of outdoor ceiling fans. More protective layering may be added to specifically guard against the exposure of outside influences.

Rather than plywood, the outdoor ceiling fan blades are often produced of ABS plastic. This material is sturdy and tough enough to oppose the harsh effects of warping caused by moisture, and the possibility of discoloring caused directly by UV exposure.

Two kinds of outdoor ceiling fans

Two kinds of outdoor ceiling fans are available: those that have a dry rating for slightly damp areas and those with a wet rating for extremely wet conditions. Between those two are significant differences, so it is vital to select the correct unit.

Either way, be certain the fan you buy is always UL listed for the capacity needed. This will assure you of a safe installation process without the possibility of any potential electrical hazards.

Outdoor fans produced with a damp rating are made to handle moisture only – not direct moisture, including rainfall, sleet, or snow. Screened porches, patios, and other covered areas protected from dripping or direct moisture contact are appropriate locations to install these units. Outdoor fans with a wet rating can be installed indoors and outdoors in covered or uncovered areas.

These units are specifically made to operate in rainy conditions. An open gazebo, a lanai with a lattice covering or any shaded constructions are areas to safely install an outdoor ceiling fan with a wet rating – as well as wooden decks, patios, and covered porches.

Purchasing a wet-rated outdoor fan over a damp-rated design is encouraged because they are significantly water sealed so all that you have to do is simply hose them off to clean them.

Installation of an outside fan (also commonly known as indoor-outdoor ceiling fans) can also be safely completed inside the home – from the living room to nearly any room in the house. Most people make this choice because of the distinguished characteristics an outdoor fan has.

Additionally, for any room in your home that is susceptible to excessive moisture, such as bathrooms or laundry areas, an outdoor fan is highly advised. They significantly are a benefit when used in homes that are located in climates that are muggy or humid.

Many people wonder if battery-operated outdoor ceiling fans are available, particularly when they are faced with the challenge of connecting wires and putting them in junction boxes. This option would be a practical solution for outside lighting. However, while ceiling fans are available that are DC-powered, these units are typically not strong enough to meet the capacity required for the outdoors. The majority of ceiling fans using DC power have an AC/DC converter which still requires electrical wiring.

Light fixtures that are used with ceiling fans also have damp or wet ratings. This function is vital to consider when you are purchasing ceiling fans with lights. Purchasing a fan that comes with an outside lighting fixture is best to be assured they are compatible.

But if this is not possible, buy a lighting assembly produced by the same product manufacturer with a matching rating. Some reputable manufacturers and designers of outdoor units include Monte Carlo ceiling fans or Hunter outdoor ceiling fans.

Tips for Choosing the Best Ceiling Fan Blades

There is an interesting variety of ceiling fan blades out in the market. They come in many different colors, features, materials, styles, sizes, shapes, and brand names that may easily confuse and overwhelm any novice buyer.

For this reason, buyers need to be aware of what to look for when buying ceiling fan blades in order to prevent frustrating purchase mistakes from happening.

Here are some tips that can help you decide on the right ceiling fan blades to buy for your home or office:

  • The size of the ceiling fan blades must be determined by the size of the room where they will be used. The basic rule of thumb is this: Small rooms require smaller blades and larger rooms require larger blades. Scale is the name of the game when it comes to deciding the appropriate blade size.
  • Good things are never cheap. Normally, cheaper brands can never match the quality that you can find in top-notch ceiling fan blades. Be willing to pay more for quality blades that possess advanced overall quality and performance. You will surely get your money’s worth in the long run.
  • Prioritize quality when choosing blades and fan motors. Motor housings and blade holders must be die-cast and not stamped. This adds to the steadiness of the motor thereby reducing noise level.
  • Check for ceiling fan blades’ performance. The angle or pitch of the ceiling fan blades determines the amount of air they can push and move. The normal range is 8 to 15 degrees. Remember that a higher pitch can move more air.
  • Match the color, design, or finish of the fan motor and ceiling fan blades with your interiors. Do you want brass, bronze, steel, iron, nickel, or copper finishes? What kind of ceiling fan blades fit your home or office? You can choose from plastic, palm, metal, bamboo, wood, and cloth finish. You may want to consult with your interior decorator for possible options that are still aesthetically appealing for your interior.

Benefits of selecting the right Blades

After educating yourself on how to choose the best ceiling fan blades, you must then take note of the advantages that such good blades can give you. Here they are:

  • Having good quality ceiling fan blades can provide durability for you. This means that even if you spend a bit more on them, you will still receive great value for your money because these blades are long-lasting and will not easily be damaged.
  • You will not have to worry about accidents with fantastic ceiling fan blades. Remember that safety should be a top priority when choosing the blades. You will not run the risk of having them suddenly cut off from the motor or being thrown apart when a certain object gets entangled in them.
  • When the performance of your ceiling fan blades is very good, you will surely be able to enjoy the cool air that the fan will bring to the room.
  • Having great ceiling fan blades with a nice appearance will surely help in improving the overall look of your room. Be sure to choose the ones that match the interior design of the room.

Disadvantages of Cheap Blades

On the other hand, buying ceiling fan blades that are cheaper and are not of good quality can pose some risks for you:

  • One disadvantage of such blades is the fact that you may have to keep repairing or replacing them. You will then end up spending more.
  • If you do not follow the tips given above, another negative possibility you may encounter is a lack of safety. What if the blades suddenly collapse or get tossed around in the room? This may harm people or destroy other things you have inside the room.
  • Having not-so-good blades may result in poor ventilation and coolness of the air, which will defeat the purpose of why you bought the ceiling fan in the first place.

Knowing these things will help you appreciate why it is important for you to seriously consider getting a good ceiling fan for your house or office rooms. be sure to keep in mind that ceiling fan blades should be one of the first things you must look at when selecting the best ceiling fan for your needs.

These ceiling fan blades will greatly affect the overall performance of your fan as well as your general satisfaction and happiness about the product.

Replacing an outdoor ceiling fan Blades

When you purchase an outdoor ceiling fan, you may have been happy with the blades at that time. As time goes on, our tastes change and some things made need to be upgraded and updated to go along with these changes you are making. You may want to change the blades on your outdoor ceiling fan in order to get a more modern look.

The great thing about outdoor ceiling fans is that it is very easy to change out the blades. All you need is a screwdriver and you can get started. If you have a black ceiling fan, you may want to replace the black blades with another color or style that is more cheery.

Metal and Plastic Blades

Ceiling fan blades come in a wide variety of styles and materials. You may want to stick with plastic blades as they do not rust the way that metal blades can when the weather is inclement.

Plastic also repels water where wood can actually soak up the water and can get rotted or damaged. If you get treated wood, this may not be a problem in the short term, but you will have to make sure you stick with the maintenance and keep the wood treated.

If you do not, then you will have the problems noted above. Wood looks great, but it can be a high-maintenance material. This is why plastic blades are so popular with those who use outdoor ceiling fans. You can find plastic blades in a wide variety of styles and colors.

If you love animal print, then you can get leopard print blades. When you change your blades from a dark color, you may want to switch them out for a bright yellow or blue.

You can even get plastic blades that have a wood grain look so that you can still have the wood blades you want with the low maintenance of plastic blades. Another way you can update your blades is to purchase vinyl clings or decals that can be placed on the blades to give them a fresh look.

Safety measures

When replacing the blades, make sure you turn off the electricity to the fan itself on the breaker. You do not want to accidentally put your screwdriver into an area that may electrocute you. Remove the screws that are holding the blade mounts in.

Set them to the side until you have all of the blades taken off. Remove the bracket from the old blades and put them on the new blades. Replace the blades onto the motor and turn the electricity back on.

You have just changed out the blades and now have a whole new look for your deck or patio. It is not hard to change out the outdoor ceiling fan blades and it does not take a good deal of time nor cost a lot of money to do. You can have a new look as often as you like. Some may even want to have one color for each season!

How to install an Outdoor ceiling fan

So you just purchased a brand new black outdoor ceiling fan and you are not sure how to install it. You got it on sale and you do not want to pay an electrician to hang it for you. In these tough economic times, saving money wherever possible is of utmost importance to many.

There is no need to hire a contractor to install an outdoor ceiling fan. You can do this yourself with minimal hassle. The first thing you want to do is make sure that the ceiling fan you purchased is large enough to cover the area where you want to hang it.

Assuming that you did this before you purchased the fan then you can move on. If the ceiling fan is not large enough or is too large, then you should exchange it for the appropriate size.

The Casablanca Outdoor Ceiling Fan company sells many different sizes of outdoor ceiling fans. There are many other companies that offer a wide variety of sizes and styles as well. You will have no problem finding the perfect fit for the area you want to cool.

The next step may be a bit more complicated for the novice at doing DIY projects. If you do not have any experience with electricity, you may want to call a buddy who does to help out. You will need to have someone who is familiar with this aspect of the installation.

When you are ready, you need to turn off the electricity on the breaker that will be used to power the fan. This is the most important step. If you begin cutting on wires that are hot, or that have electricity running through them, then you could become seriously injured.

You will then need to either run the electricity out to the area you want to install the fan or access the electrical wires that are already established. Once you do this, then you need to install the housing box for the fan.

The fan blades need to be attached to the brackets and the housing of the fan before you install it. Make sure that you have the correct side of the blade that you want showing facing down. If you have a black ceiling fan, then the black side of the blades should face down if there are two colors.

Put together the motor with the housing and hang it from the bracket. Make sure the electricity is off before you hook the wires together. You also want to make sure you have the correct wires connected. You do not want the negative wire to be hooked into a positive connection.

It is not difficult to install an outdoor ceiling fan if you follow the directions given to you by the supplier. If you do not feel that you have the ability to hang it yourself, you should call someone that you trust to do the job. As a last resort, you can hire an electrician to hang it

 

Leave a Comment